Table of Contents
Advertisement
Auto (Color/Black)
■
If the Auto(Color/Black) mode is selected, the
machine automatically recognizes whether
the original is in color or black-and-white.
Color originals are copied in the Full Color
2
mode, while black-and-white originals are
copied in the Black mode.
When the Auto(Color/Black) mode is set
and your originals contain color sections,
the machine copies them in the Full Color
mode. However, the machine may copy
color originals in the Black mode under the
following conditions. To avoid this, set the
color mode to 'Full Color' .
2-72
Basic Copy Settings
- If the originals contain few color sections
- If the color sections are located only on the
left side (within 3/8" (10 mm) from the left
edge) or the right side (within 5/8" (17 mm)
from the right edge) of the originals when
placing the originals in the feeder
- If the originals contain light color densities
- If the color sections of the originals are close
to black
Advertisement
Table of Contents
