Table of Contents
Advertisement
• If the top edge of the original is not aligned
with the back edge of the platen glass (by
the arrow in the top left corner), your original
may not be scanned correctly, depending on
the copy modes that you have set.
• Originals of the sizes below can be placed
either vertically or horizontally. However,
the scanning speed for horizontally placed
originals is somewhat slower than vertically
placed originals. Place originals horizontally
when scanning with a Preset Zoom, such as
when enlarging an LTR/A4 original onto 11" x
17"/A3 paper.
- Platen glass: LTR and STMT/A4, B5, and A5
- Feeder:
• Horizontally placed LTR and STMT/A4, B5,
and A5 originals are referred to as LTRR and
STMTR/A4R, B5R, and A5R.
• 11" x 17" and LGL/A3 and B4 originals must
be placed horizontally.
LTR and STMT/A4 and B5
Placing Originals 2-27
2
Advertisement
Table of Contents
