Bennett Read Power Up Pet Advanced User Manual page 15

CLEANING THE UPPER TANK
1. Remove the lid of the Dirt Container (10) by twisting the lid
to the "unlock" position. Remove the Pre-motor Filter (19)
2. Separate the Dirt Container (10) and Multi-cyclonic Filter
assembly (9)
3. Wipe the inside of the Dirt Container and Multi-cyclonic
Filter assembly with a damp cloth moistened with water
or a mild cleaning solution
4. To thoroughly clean the Multi-cyclonic Filter assembly, turn
the entire assembly upside-down, then turn the locking disk
to the "unlock" position to release
5. Separate the inner cyclone from the sheath
6. The inner cyclone and sheath may be washed with water
and a mild detergent. Be sure that they are completely dry
before reassembling or you may damage the unit
7. Once cleaning is complete, allow all the parts to air-dry
completely before reassembling
2
STORING THE FLEX HOSE
1. Loop the Flex Hose (17)
over the storage hook
and insert the end of the
Flex Hose with the clip
into the on-board storage
slot and clip into place
2. Secure the 2 ends togther
with the slide-in slot
4
1
13
1
5
1