Power Cord Usage; Maintenance And Care - Bennett Read Power Up Pet Advanced User Manual

!
NOTICE:
!
CAUTION:

POWER CORD USAGE

1. To use your vacuum, remove the Power Cord
(16) and plug it into an electrical outlet. For
your convenience, there is a Quick-release
Power Cord Holder (15) for easy storage
and removal. There is also a cord clip that is
located at the back of the Handle to attach
the Power Cord while vacuuming
2. When you are finished vacuuming, switch off
the wall plug and unplug the Power Cord,
then loop the Power Cord around the Cord
Holders. Be sure to first return the top Quick-
release Cord Holder back to its original
position before wrapping the Power Cord

MAINTENANCE AND CARE

To maximize your cleaning performance and extend the life of your vacuum, it is very
important that you empty your dirt container and check and clean your filters frequently.
Perform the following maintenance steps:
1. Empty the dirt container when the dirt reaches the "Full" line on the container,
or more frequently to prevent overfills. For best performance, empty after each use
2. Check the pre-motor filter and post-motor filters at least twice a month, clean or replace
as needed.
NOTE: More frequent filter cleaning may be necessary if you are vacuuming new
carpet, fine dust, or have allergy concerns. Follow the instructions on the following
pages to perform these simple maintenance steps
!
!
WARNING:
TIP
When using the Handheld Pet Turbo Brush, press down gently and pull
towards you in a raking motion.
Too much pressure will cause the brush to stop rotating.
To reduce the risk of injury from moving parts, always move the cleaner with
the carrying handle. Always place vacuum cleaner on the floor with handle
in upright position when using tools. Never place your fingers under the
cleaner when it is running. Never place vacuum foot on furniture or uneven
surfaces. Do not place vacuum cleaner close enough to objects to pull them
into rotating brush.
To reduce the risk of electric shock, turn power switch OFF and
disconnect plug from electrical outlet before performing maintenance
or troubleshooting checks.
To maximize cleaning performance, check and clean or replace
all filters as suggested.
9
TIP