Table of Contents
Advertisement
STEP 1
Turn water filtration system inlet water shut off valve to the "OFF" position.
Example of a Modular Manifold
STEP 2
Open faucet down stream to relieve pressure or if the water filtration system
is already vented with plastic tubing to drain, turn vent valve lever to open.
This will also relieve pressure.
STEP 3
Looking directly at the water filtration manifold, locate furthest modular
head on right side of manifold. Remove the right front and right rear retention
clips (refer to Appendix A on page 5). Set both clips aside for later use.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the SH-EXP and is the answer not in the manual?
Questions and answers