Reader; Reader Feedback - IDS X Series Training Manual

10.2.

Reader

10.3.

Reader Feedback

Each aXess reader has three different colour LEDs, Red, Yellow, Green and a beeper to communicate
feedback to users of the system, depending on the type of reader.
Action Description
Factory Reset
Enrol Mode
Idle
Learn Tag Mode
Access Granted
Access Denied
Door Forced
Door Left Open
Tag Held in Field
Note: Unless otherwise stated the Yellow LED will stay on unless there is a communication issue with the
panel in which case it will flash.
Arming Only
Red and Green LEDs flash in sync, and Yellow LED flashes out of sync.
Red LED follows Arm LED, and Green LED
follows Ready LED.
Red LED follows Arm LED and Green LED flashes.
N/A
N/A
Beeper sounds 3 times.
Yellow LED flashes slowly.
Red – 12v power
Black – 0v power
White – R1/R2
Yellow – Yellow1/Yellow2 LED
Orange – Red LED
Green – Green LED
Blue – Beeper
Access Only
All LEDs flash in sync.
Red LED follows Arm LED and Green LED
Red LED follows Arm LED and Green LED follows Relay.
Beeper sounds once.
Red LED on for 2 seconds. Beeper sounds 3 times.
Red LED on for 2 seconds and Beeper sounds 3 times.
Beeper sounds for 15 seconds.
N/A
IDS X-Series Training v2.7 | Hardware
Arming and Access
follows the relay.
N/A
19