2 Engineering
7. Enter the user data for the "CMT - Configuration and Monitoring Tool".
8. Set the "Connect Automatically" checkbox.
9. Then confirm with "OK".
10. In the following dialog, accept the server certificate by setting the checkbox
"Accept the server certificate temporarily for this session".
10
The certificate is not stored in the "UaExpert" trusted list.
To permanently add the certificate to the "UaExpert" trusted list, you must select
Note
"Trust Server Certificate".
Monitoring of Remote Measurement Points
Entry ID: 109739240,
V3.0,
192.168.0.100:4852
06/2021
53