Configuring Sms/Email Sending/Receiving - Siemens SIMATIC RTU3041C Manual

2 Engineering

Configuring SMS/email sending/receiving

To enable the RTU3041C to send messages and data for configurable event
classes (diagnostic buffer entries), either as SMS or as email to an operator,
proceed as follows:
1. Navigate to the "Users / groups" menu.
2. Add a new user with the name "Administrator".
3. Enter the phone number with country code (e.g., "+49" for Germany).
4. Enter the email address for the "Administrator" user.
5. Then click "Apply".
The RTU3041C only accepts wake-up SMS messages from phone numbers that
Note
are stored here.
6. Open the "Recipient groups" tab.
7. Add a new group named "Administrator SMS".
8. Select the type "SMS".
9. Enable the "Administrator" user.
10. Then click "Apply".
Monitoring of Remote Measurement Points
Entry ID: 109739240, V3.0, 06/2021
10
17