2 Engineering
2.2.2
Configuring the TeleControl Server Basic
To configure the TeleControl Server Basic, proceed as follows:
1. Open the program "CMT - Configuration and Monitoring Tool" on your PG/PC.
TeleControl Server Basic must be installed on the PG/PC.
2. Log in with your user data.
The following user data is preset at the factory:
–
User: administrator
–
Password: 0000
3. When you log in for the first time, assign your own password.
4. Create a new project by clicking "Add".
Monitoring of Remote Measurement Points
Entry ID: 109739240,
V3.0,
06/2021
47