Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-Advance Vacuum Cleaner
Summary of Contents for Nilfisk-Advance Vacuum Cleaner
-
Page 1: Instructions For Use
Instructions for use www.nilfisk.com... - Page 3 Telescopic Tube 2. Handle 3. Hose 4. On/Off Switch 5. Power Regulation Cable Rewind Button 7. Floor Brush...
-
Page 4: Precautionary Measures
If the opening that sucks in the air, the suction pipe or the telescopic tube stick on pipe are blocked, you should switch off the vacuum cleaner at once. First clear the blocked substance before you attempt to start the vacuum cleaner again 1. -
Page 5: Assembling Vacuum Cleaner
If anything gets damaged, both the plug and the cable must be repaired by a Nilfisk service agent. ASSEMBLING VACUUM CLEANER Always remove the plug from the power socket before fitting or removing accessories! 1.Connecting vacuum cleaner 1. Fitting or removing the flexible hose... - Page 6 c. Fitting the brush to the extension tube. Extension Tube Floor Brush Fitting floor brush Ideal for the daily cleaning of carpets and hard floors. Cleaning the carpet Cleaning the hard floor...
- Page 7 2. Cleaning tools use The crevice tool and dusting brush are stored on the accessories holder. 1. Crevice tool: For crevices, corners, baseboards and between cushions. 2. Dusting brush is used for furniture, venetian blinds, book, lamp shades and shelves. 3.
- Page 8 INSTRUCTIONS FOR USE Before using appliance, unwind a sufficient length of cable and insert the plug into the power socket. A yellow mark on the power cable shows t he ideal cable length. Don’t extend the cable beyond the red mark. 1.Press the ON/OFF button to switch the appliance on.
-
Page 9: Maintenance
MAINTENANCE 1. Emptying rubbish from the dust compartment subassembly Always operate the cleaner with the dust compartment subassembly completely installed. The dust container must be emptied if the window of the filter indicator turns fully red when the cleaner is operating at maximum power and the nozzle is raised from the floor. - Page 10 4. Carry away the dust-glass cap and empty rubbish 5. If dirty, turn and take out the cone and clean it. 6. Replace the dust compartment subassembly until it is locked. 2. Cleaning and changing the HEPA filter Filter for air-inlet should be cleaned regularly or before it becomes visible solid.
-
Page 11: Changing The Exhaust Filter
(2) Rinse bracket and HEPA in lukewarm water and dry Filter and HEPA completely. (HEPA can be cleaned by a soft brush.) (3) Rinse filter in lukewarm water and dry filter completely. 3. Changing the exhaust filter 1. Open the cover for exhaust filler. 2. - Page 12 • If the machine has been used for home renovations. • If the machine has been used for suction of water,plaster dust or sawdust. Nor will it cover incorrect or poor confi guration, i.e. setting up or connection, nor fi re-damage, fi re, lightning strike or unusual voltage fl...
Need help?
Do you have a question about the Vacuum Cleaner and is the answer not in the manual?
Questions and answers