Inserting Color Filters (Full Köhler Stand) - Zeiss Primostar 3 Instruction Manual

4 Installation | 4.3 Installing Additional Components
4.3.4 Inserting Color Filters (Full Köhler Stand)
Procedure 1. Move the condenser carrier up as far as it will
2. Unscrew the cover cap from the luminous-field
3. Put the desired filter − yellow, green or blue − onto the mounting surface of the luminous-
4. Screw the cover cap back into place.
48
go by turning the knurled ring for condenser
height adjustment.
diaphragm.
field diaphragm.
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en
ZEISS