Installation; Viewing The Typical Installation - Samsung Max Heat 2.0 Technical Data Book

11. Installation

Viewing the typical installation

A typical installation will be similar to the one shown below.
Indoor Unit
Maximum pipe height
Maximum pipe length
Model
Minimum
**09*******
9.8 (3)
**12*******
**18*******
9.8 (3)
**24*******
Outdoor Unit
Outer wall
Cut insulation to have
rainwater drained
Evaporator/fancoil (indoor)
Pipe length
Standard for factory
Maximum
charge
65.6 (20) 24.6 (7.5)
98.4 (30) 24.6 (7.5)
Make a U-trap (A) on the pipe (which is
connected to the indoor unit) at outer wall
and cut the bottom part of the insulation
CAUTION
CAUTION
(about 10 mm) to prevent rainwater from
getting inside through the insulation.
Refrigerant lines,
electric, and drain
Compressor/condenser(outdoor)
Unit : ft (m)
Pipe height
Maximum
49.2 (15)
65.6 (20)
51