Maintenance Practices - Cirrus SR22 Maintenance Manual

C I R R U S
A I R P L A N E M A I N T E N A N C E M A N U A L

2. MAINTENANCE PRACTICES

A. Stall Warning Horn - Serials w/o Perspective Avionics
(1) Removal - Stall Warning Horn
(a) Remove glareshield.
(b) Remove MFD.
(c) Disconnect stall warning horn electrical connector.
(d) Serials 22-0002 & subs before SB 2X-27-15: Remove screws, washers, and nuts securing
horn to console rib. Remove horn from airplane.
(e) Serials 22-0002 & subs after SB 2X-27-15: Remove bolt and nut securing horn assembly
mounting bracket to console rib. Remove horn assembly from airplane.
(2) Installation - Stall Warning Horn
(a) Serials 22-0002 & subs before SB 2X-27-15: Position horn to console rib and secure with
screws, washers, and nuts.
(b) Serials 22-0002 & subs after SB 2X-27-15: Position horn assembly mounting bracket to
console rib at a 45
(c) Connect stall warning horn electrical connector.
(d) Install MFD.
(e) Install glareshield.
(f) Perform Operational Check - Stall Warning System - Ground.
(g) Perform Operational Check - Stall Warning System - Flight.
27-31
Page 2
15 Jun 2010
(Refer to 25-10)
(Refer to 31-60)
o o
±5 angle and secure with bolt and nut.
(Refer to 31-60)
(Refer to 25-10)
EFFECTIVITY:
Serials w/o Perspective Avionics
M O D E L S S R 2 2 A N D S R 2 2 T
(See Figure 27-311)
(Refer to 27-31)
(Refer to 27-31)