Advertisement
Digital Satellite Signal Quality Finder
Set Up Instructions
SATELLITE DISH ALIGNMENT SETTINGS
10. DISH
From the alignment completed in step 8. COMPASS.
Slowly move the Satellite Dish left and right until the instrument
starts to beep and some Signal Quality lights FLASH.
At this point you may also notice the LOCK light on the instrument
has become
11. ADJUST
Now that you have found the required Satellite, it is just a matter
of fine adjustments.
Move the Satellite Dish slightly left or right, up and down, watching the
GREEN
If you have signal Strength and Quality you have
found the correct Satellite.
The instrument BEEP becomes faster and more
Quality lights glow as the signal improves.
Perfect signal sounds a long continuous BEEP.
If you have signal Strength only, you may have found the
wrong Satellite and you will need to double check your
Coarse Alignment Settings.
Tech Tip:
If you start with a slightly higher elevation, as you pan
the Satellite Dish side to side, slightly lower the Satellite Dish
after each pass in 1 Degree increments, you are sure to
the correct Satellite.
GREEN
.
Signal Quality indicators to achieve maximum Signal Quality.
GREEN lights
represent Signal Quality.
RED lights
represent Signal Level.
GREEN
LOCK
SQ722
IS LAB SQ722 0520.PDF | P 4-5 |
Advertisement
