Advertisement
Digital Satellite Signal Quality Finder
Set Up Instructions
SATELLITE DISH ALIGNMENT SETTINGS
FINAL ADJUST
12. Make small adjustments to LNB Skew or Rotation, again watching
the
GREEN
Note:
optimizing LNB Skew, so your body doesn't block the signal.
13. Tighten the elevation nuts.
14. Tighten the azimuth nuts in an equal pattern.
Monitor green Signal Quality lights while tightening nuts as tightening
can move it slightly and detune.
Tech Tip:
LOW
for reliable pictures.
OK
Pixelization may occur with rain signal fade.
MAX
margin above rain fade.
15.
between your Satellite Dish and Receiver.
As SQ722 is a pre-programmed tool, signal does
pass through.
16. All that is left to do is sit back and enjoy your Satellite reception!
Signal Quality indicators for the maximum available value.
stand to the side of the front of the Satellite Dish when
on the Signal Quality indicator you will notice...
indicates Satellite found but not enough Signal Quality
indicates Satellite found and stable pictures should result.
indicates Satellite found and a stable picture with
Disconnect the SQ722
SATELLITE DISH ALIGNMENT COMPLETE
and
reconnect coax cable
directly
not
fully
SQ722
IS LAB SQ722 0520.PDF | P 5-5 |
Advertisement
