Labgear SQ722 Setup Instructions page 4

Digital Satellite Signal Quality Finder
Set Up Instructions
COARSE ALIGNMENT SETTINGS
7. LNB The next step is to set LNB Skew. Rotate the LNB following the
GREEN angle lines
For example: in Melbourne, the adjustment angle would be
+31 Degrees Rotation, clockwise.
+31 Degrees
Rotation
8. COMPASS
Using a Compass and the
left to right, azimuth or side ways position of the Satellite Dish in the
direction indicated.
SATELLITE DISH ALIGNMENT SETTINGS
9. SIGNAL
Looking at the instrument, there are 2 lines of LEDs.
Signal Quality shows clearly when you have the right Satellite!
on the map.
NOTE:
Helpful markings are on the top of
many LNB's.
RED angle lines
COARSE ALIGNMENT COMPLETE
+ -
on the map, point the
GREEN lights represent Signal Quality.
RED lights represent Signal Level.
Rotation
Direction
0
SQ722
IS LAB SQ722 0520.PDF | P 3-5 |