Safety Warnings - Milwaukee Heavy Duty M18 HCCT User Manual

3
2
10
4 5
10
11
12
Device description
1. Hydraulic release button
2. Locking bolts
3. Die release tabs
4. Crimping jaws
5. Trigger
6. LED
7. Hanger
8. LED / Crimping indicator
9. Battery
10. Handle / Insulated gripping surface
11. Cutting blades
12. Cutting jaws
LED indicator Definition
Tool completed the operation
and reached full crimping
pressure.
Solid Green
Tool completed the operation
but did NOT reach full
crimping pressure.
Solid Red
Tool did NOT complete the
operation.
Flashing Red
Tool has reached its service
interval (30000 crimps). Red/
Green flashing will begin
after the solid Red or Green
Flashing Red/
indicator for the operation is
Green (after Solid
displayed.
Green or Solid
Red) MILWAUKEE recommends
that the tool be inspected and
preventative maintenance
completed.
WARNING! Read
instructions, illustrations,
provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock,
fire, and/or serious injury.
18 English
8
1
7
6
9
all safety warnings,
and specifications
18
Save all warnings and instructions for future
reference.

SAFETY WARNINGS

The operator of this product must be instructed in the
speci c dangers associated with using this product
and in the essential safety measures before working
with it for the rst time and at least once a year
thereafter. The operating company must:
make the operating manual available to the
operator, and
ensure that the operator has read and understood it.
Use protective equipment. Always wear goggles when
using the product. The use of protective clothing is
recommended, such as dust mask, protective gloves,
sturdy non-slip footwear, helmet, and ear defenders.
Never hold your ngers or other body parts in the
working area of the cylinder or the jaws.
Remove the battery pack before starting any adjustment,
cleaning, and maintenance work on the product.
Only use devices, battery packs, and chargers that are
in perfect technical condition.
Have damage repaired immediately by an authorised
workshop.
To avoid injury and damage, prevent accidental starting
of the device.
Remove any setting tools and wrenches before the
operation.
Do not work on electrically live parts. Device is NOT
insulated.
WARNING! To reduce the risk of re, personal injury,
and product damage due to a short circuit, never
immerse your device, battery pack, or charger in
uid or allow a uid to ow inside them. Corrosive or
conductive uids, such as seawater, certain industrial
chemicals, and bleach or bleach-containing products,
etc., can cause a short circuit.
Compliance with the speci ed service work and
service intervals is mandatory.
Never break open battery packs and chargers and
store only in dry rooms. Keep dry at all times.
Use only M18 System chargers for charging M18
System battery packs. Do not use battery packs from
other systems.
To avoid injury and damage, never immerse the tool,
removable battery, or charger in liquid or allow liquid
to penetrate them.
WARNING!
This device contains a button-type/coin cell
lithium battery. A new or used battery can cause
severe internal burns and lead to death in as little as
2 hours if swallowed or if it enters the body. Always
secure the cover on the battery compartment. If it
does not close securely, stop the device, remove the
battery, and keep it out of reach of children. If you
believe that someone has swallowed the battery or
that it has otherwise entered the body, seek immediate
medical attention.