Lacing The Sliding Bar Buckle - ATN Night Shadow 3 Operator's Manual

Atn nvm14 series day night sight multi-use minimonocular

Hide thumbs Also See for ATN Night Shadow 3:

Table of Contents

C. LACING THE SLIDING BAR BUCKLE

While donning and adjusting the headmount, it is possible for a

strap to slip out of a slide fastener. Perform the following proce-

dure to replace the strap and sliding bar buckle.

Thread the strap from the inside of the buckle over the moveable

sliding bar (see Figure 6-2). Thread the strap back through the

buckle but this time under the sliding bar and over the serrated

part of the buckle.

Figure 6-2

Lacing the Sliding Bar Buckle

Table of Contents