Attaching Atn Nvm-14 To Head Mount - ATN NVM14 Operator's Manual

3.1. MOUNTINg pROCEdURES
A. MOUNTING The ATN NVM-14 TO A
hEAdMOUNT
to mount the atN NVM-14 to a headmount, perform the following:
1. loosen the screw (a). push the button (B) and insert the rail of
the NVM-14 into the socket (C) of the headset.
2. place the headmount with NVM-14 onto a head.
3. loosen the screw (a) and move the unit along the rail for eye
relief adjustment.
4. the NVM-14 headmount has a flip-up mechanism. push the
button (D) on the side of mount and lift the unit up until the unit
reaches in the top position. When the device is placed in the
top/up position it will turn off automatically.
5. push the same button (D) to lower NVM-14 to the viewing
position. turn the device on for continuation of the operation.
6. the NVM-14 can be placed before the right or left eye. In order
to re-adjust the monocular for use with another eye, take the
unit off the adapter, turn the unit to other side (for 180º) and
mount it on the headset through the rail on this side. push the
button (e) and move the device along the slide-rail (F) for com-
fortable position.
FIGURe 3.1. ATTAChING ATN NVM-14 TO heAD MOUNT
3-2
d
b
A
C
F
E