Preventive Maintenance And Warning - Eurotech ELV2-BLK-FS Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS
ELV2-BLK-FS/ELV2-WHT-FS
Remove all items from the carton. Verify all components before assembly.
STEP 1
F
Press the Casters (F) into the holes at the end of each
leg of the Base (D).
Insert Seat Post (E) into the center hole of the base (D).
STEP 3
C
Attach ea ch Ar mrest (C) to th e Se at Cu shion (B)
using Ar mrest Bo lts (I) an d Wa shers (N ) fo r ea ch ar m.
Tighten se curely wi th th e en closed Al len Wr ench (J).
• USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
• DO NOT USE THIS CHAIR AS A STEP STOOL / LADDER.
• DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT.
• DO NOT USE CHAIR ON UNEVEN FLOOR SURFACES.
• DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE TIGHTENED.
• EVERY SIX MONTHS, PLEASE MAKE SURE ALL BOLTS, SCREWS AND KNOBS ARE
FULLY TIGHTENED TO ENSURE STABILITY.
STEP 2
E
STEP 2
D
Please be careful to use the correct Back Bolts (H).
Assemble th e Ba ckrest (A) to th e Se at Cu shion (B) using
3 Back Bo lts (H)
and
Tighten the bolts securely with the enclosed Allen
Wrench (K).
J
I
N
Now turn the assembled seat upright and locate the
center hole of the Mechanism over the Seat Post.
Push down firmly until the connection is secure.

PREVENTIVE MAINTENANCE AND WARNING!

• IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE
PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORIZED PARTS.
• DISPOSE OF PACKAGING PROPERLY. PLASTIC BAG IS NOT A TOY. DO NOT USE
PLASTIC BAG AS HEAD COVERING – IT MAY CAUSE SUFFOCATION.
• FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
• NOTE: SOME SCREWS MAY BE PREASSEMBLED. IF PREASSEMBLED, IGNORE
ASSEMBLY INSTRUCTIONS.
STEP 2
K
H
L
M
B
A
with 3 Spring Washers for Back screws (L)
3 Washers for Back Bolts (M).
STEP 4
Seat must slide into the slot on back.