Menu List - Sony SA-Z1 Operating Instructions Manual

Menu List

This is a list of setting values and items that can be set on the menu.
The default settings are underlined.
Setting items
[LOW VOL MODE]
Optimizes the characteristics of the bass and
treble. Playback can be done with a balanced
sound that is close to the original sound,
even if the volume is adjusted to a low level.
[LR BALANCE]
Adjust the output balance of the left and
right speakers.
[WM CHARGE]
Set whether to start charging your Walkman
automatically when it is connected to
speaker A's WALKMAN port.
You must connect the Walkman using the
digital cable for Walkman (supplied).
If the Speaker System is not on, the Walkman
cannot charge.
[AUTO STANDBY]
Set whether to turn off the power
automatically when the Speaker System
is silent and have been inactive for about
20 minutes.
[VERSION]
Check the version of the Speaker System.
[RESET]
You can reset the input, volume, and menu
settings to the factory defaults.
36
US
Setting values
• [OFF]: Off
• [ON]: On
Adjust within the following range.
[L −3.00dB] – [CENTER] – [R −3.00dB]
(0.25 dB decrements)
• [OFF]: Off
• [ON]: On
• [OFF]: Off
• [ON]: On
• [UCOM-A]: Shows the system version for
speaker A.
• [USBDSP]: Shows the version of the
interface software for USB-B and
WALKMAN input.
• [UCOM-B]: Shows the system version for
speaker B.
• [START]: Resets the settings to the factory
defaults.
• [CANCEL]: Cancels the operation.