Table 5-17 Technical Specifications Of Ot Terminal - Raisecom iTN201-R Hardware Description

Raisecom
iTN201-R (C) Hardware Description
Conducting wire
Stripped end
Cable length
Table 5-17 lists technical specifications of the OT terminal.

Table 5-17 Technical specifications of OT terminal

Model
Specifications
Cross-section area of the
conducting wire

An OT terminal will be randomly delivered with the iTN201-R. However, the
ground cable is not delivered with the iTN201-R. You need to prepare or make the
ground cable on site as required.

The length of the ground cable cannot be greater than 30 m and should be as
short as possible. If the length exceeds 30 m, use a ground bar instead.

Yellow/Green multistrand copper 16AWG (1× 1.25mm
 Comply with UL1007 or UL1005 standard..
10 mm long and tinning
70 mm, 105 mm, or customized
The D in the cable model represents the cable length, which can
be customized. For example, if the length of the customized
cable is 2 m, the cable name will be PIL-ground cbale-Φ4-200
mm/RoHS.
Parameter
Protective grounding pressed round terminal (M4)/RoHS





16–15 AWG (1.2–1.5 mm
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
4.3 soldering terminal
Inner diameter: 4 mm
Outer diameter: ≤ 8 mm
Diameter of the stripped wire: 2.1 mm
Thickness of the soldering lug: ≥ 0.6 mm
5 Fiber and cables
2
)
2
) wire
57