Mcc; Itn201-4Gf-R; Functions - Raisecom iTN201-R Hardware Description

Raisecom
iTN201-R (C) Hardware Description
2

MCC

This chapter describes functions, appearance, interfaces, LEDs, and technical specifications of
the iTN201-R MCC, including the following section:



2.1 iTN201-4GF-R

2.1.1 Functions

The iTN201-4GF-R is the main service access and processing unit of the iTN201-R. It
accesses and processes up to 16 ways of Ethernet services. The iTN201-4GF-R can be
inserted into the MCC slot only.
The iTN201-4GF-R provides the following features:











iTN201-4GF-R
iTN201-2XG-R
Provide sixteen 1000 Mbit/s Ethernet optical interfaces among which 12 interfaces are
provided through the TSFP optical module; support loopback interface.
Provide a RJ45 out-of-band SNMP interface.
Provide a Universal Serial Bus (USB) Console interface, complying with the USB 2.0
standard.
Support Digital Diagnostics Monitoring (DDM) of the Small Form-factor Pluggable
(SFP) and Two-channel compact Small Form-factor Pluggable (TSFP) modules.
Support hot swapping between the MCC and the backplane/subcard.
Support interface configuration and status inquiry.
Support 802.1Q Virtual Local Area Network (VLAN).
Support basic QinQ and selective QinQ.
Support global 32× 1024 Medium Access Control (MAC) addresses, including 200 static
MAC addresses.
Support Multi-Protocol Label Switching (MPLS) L2 Virtual Private Network (VPN) and
Layer 3 VPN.
Support Layer 3 IP services, such as Address Resolution Protocol (ARP) and Dynamic
Host Configuration Protocol (DHCP).
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
2 MCC
9