General Safety Precautions; Appearance; Chassis; Figure 1-1 Appearance Of Itn201-R - Raisecom iTN201-R Hardware Description

Raisecom
iTN201-R (C) Hardware Description

1.1.2 General safety precautions

Electrostatic safety
Wear an Electro-Static Discharge (ESD) wrist strap whenever you contact the iTN201-R. The
ESD wrist strap should well contact your skin, with the plug plugged into the ESD socket of
the iTN201-R.
High-voltage safety
When the iTN201-R is powered on, do not install or uninstall it; otherwise unpredictable
personal injury may occur.
Grounding safety
Before installation, connect the ground terminal of the iTN201-R to the ground bar in the
equipment room. Do not install the iTN201-R without being grounded.

1.2 Appearance

1.2.1 Chassis

Dimensions of the iTN201-R are 440 mm (Width) × 266 mm (Depth) × 44 mm (Height) (1U
= 44 mm). There is a backplane in the rear and 6 slots on the front panel of the iTN201-R, as
shown below:




Figure 1-1 shows the appearance of the iTN201-R.

Figure 1-1 Appearance of iTN201-R

1 MCC slot
2 extension subcard slots
1 fan module slot
2 power module slots
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
1 Overview
2