Raisecom
iTN201-R (C) Hardware Description
5
Fiber and cables
This chapter describes the fiber and cables available for interfaces of the iTN201-R, including
the following sections:
Before installing and operating the iTN201-R, check accessories contained in the
packing box based on the Packing List. The followings are cables required for the
iTN201-R. However, some cables are not delivered with the iTN201-R. If required,
prepare them based on the technical specifications.
5.1 Fiber
5.1.1 Introduction
The iTN201-R supports Single-mode Fiber (SMF) and Multimode Fiber (MMF).
Table 5-1 lists fiber connectors.
Table 5-1 Fiber connectors
Local connector
LC/PC
LC/PC
Fiber
Ethernet cable
E1 cable
Clock cable
Configuration cable
DC power cable
AC power cable
Ground cable
Remote connector
LC/PC
FC/PC
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Fiber
2 mm SMF
2 mm MMF
2 mm SMF
5 Fiber and cables
43