Overview; Introduction; Installation Scenarios - Raisecom iTN201-R Hardware Description

Raisecom
iTN201-R (C) Hardware Description
1

Overview

This chapter describes the iTN201-R, including the following sections:




1.1 Introduction

The iTN201-R is an Internet Protocol Radio Access Network (IP RAN) device developed by
Raisecom. It is mainly designed for the carrier's Packet-based Mobile Backhaul (P-MBH)
services and leased-line service access solutions based on the carrier-grade Ethernet
technology. Together with Raisecom IP RAN local devices, it can provide a complete IP RAN
solution.
Components of the iTN201-R include the chassis, power supply, fan, Main Control Card
(MCC), subcards, and cables.
The iTN201-R adopts -48/+24 VDC power supplies or 220 VAC power supplies. It also
supports hybrid DC/AC power supplies. The iTN201-R supports 1+1 power supply backup
when it is equipped with the DC or AC power supply.
The iTN201-R must be equipped with the fan. Otherwise, performance degradation
and service interruption may occur when the iTN201-R is running.

1.1.1 Installation scenarios

The iTN201-R can be installed in the following scenarios of a telecom equipment room:





Introduction
Appearance
Technical parameters
ETSI 600-mm cabinet
19-inch 450-mm cabinet
19-inch 600-mm cabinet
Open rack
Workbench
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
1 Overview
1