Appearance; Interfaces; Figure 2-1 Appearance Of Itn201-4Gf-R - Raisecom iTN201-R Hardware Description

Raisecom
iTN201-R (C) Hardware Description







Raisecom TSFP is called Compact SFP (CSFP) in the telecommunication industry.
To distinguish it from another Raisecom CWDM SFP (CSFP) and highlight its dual-
channel design, Raisecom names all compact SFPs as Two-channel compact SFPs
(TSFPs).

2.1.2 Appearance

Figure 2-1 shows the appearance of the iTN201-4GF-R.

Figure 2-1 Appearance of iTN201-4GF-R

2.1.3 Interfaces

There are 10 interfaces on the iTN201-4GF-R, with types and usage being listed in Table 2-1.
Support routing, such as
Shortest Path Frist (OSPF), and Border Gateway Protocol (BGP).
Support Layer 2 and Layer 3 Quality of Service (QoS), such as priority trust and
mapping, traffic classification, traffic policy, congestion avoidance, queue shaping,
MPLS QoS, and L3 VPN QoS.
Support Access Control List (ACL).
Support basic functions, such as storm control, port mirroring, and link aggregation.
Support 802.3ah Operation, Administration and Maintenance (OAM), Connectivity Fault
Management (CFM), Service Level Agreement (SLA), MPLS-TP OAM, and
Bidirectional Forwarding Detection (BFD).
Support G.8031 Ethernet Linear Protection Switching (ELPS), G.8032 Ethernet Ring
Protection Switching (ERPS), G.8131 MPLS-TP linear protection switching, PW
redundancy protection, and Virtual Router Redundancy Protocol (VRRP).
Support clock synchronization based on SyncE and IEEE 1588v2 (PTP). Support
inputting/outputting GPS clock signals.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Intermediate System to Intermediate System
2 MCC
(ISIS), Open
10