Maretron MPOWER CLMD16 Quick Start Manual page 3

Apply the CLMD16 unit with any Maretron device running N2K view®,
Maretron's CKM12 (12 Button Keypad) or VMM6 (Contura® Digital Switch
Module, 6 Rocker) and third party MFDs supporting NMEA2000® standard
switching PGNs. The CLMD16 comes pre-configured with an Out of Box
Configuration that allows all 16 ECB outputs to be switched by network devices
supporting NMEA2000® standard switching PGNs. The CLMD16's Out of Box
Configuration also allows for Maretron's CKM12 (12 Button Keypad) and VMM6
(Contura® Digital Switch Module, 6 Rocker) to control CLMD16 without the need
for any user configuration adjustments. Please see the Out of Box Configuration
details in this Quick Start Guide for information on the CLMD16's default
configuration and how this configuration will behave when a CLMD16 is paired
with a Maretron CKM12 or Maretron VMM6.
Note: Depending on desired switch control, default configuration may not work
for your application and custom configuration will be needed using Maretron
N2KAnalyzer®.
CLMD16 Application:
P/N: M003137 Rev. 1.4 Page 2