Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black+Decker KFBCD001
Summary of Contents for Black+Decker KFBCD001
- Page 1 KFBCD001...
- Page 2 English (original instructions)
-
Page 4: Intended Use
Intended use protected supply. Use of an RCD reduces the risk of electric shock. Your BLACK+DECKER KFBCD001 drill driver has been 3. Personal safety designed for screwdriving and drilling applications. This tool is a. Stay alert, watch what you are doing and use intended for consumer use only. -
Page 5: Safety Instructions For All Operations
(Original instructions) ENGLISH g. If devices are provided for the connection of dust A charger that is suitable for one type of battery pack extraction and collection facilities, ensure these may create a risk of fire when used with another are connected and properly used. -
Page 6: Residual Risks
ENGLISH (Original instructions) ● Brace the tool properly before use. This tool produces Even with the application of the relevant safety regulations a high output torque and without properly bracing the tool and the implementation of safety devices, certain residual during operation, loss of control may occur resulting in risks can not be avoided. - Page 7 ● If the supply cord is damaged, it must be replaced by the Return it to a service center or a collection site for ecycling. manufacturer or an authorised BLACK+DECKER Service Hot/cold pack delay Centre in order to avoid a hazard.
-
Page 8: Important Charging Notes
ENGLISH (Original instructions) Leaving the battery in the charger To install battery pack: ● Insert battery pack (6) into tool, until an audible click is The charger and battery pack can be left connected with heard (fig. C) the LED glowing indefinitely. The charger will keep the Removing the battery pack from the tool (fig. -
Page 9: Troubleshooting
● Run the drill very slowly, using light pressure, until Maintenance the hole is started enough to keep the drill bit from slipping Your BLACK+DECKER tool has been designed to operate out of it. over a long period of time with a minimum of maintenance. -
Page 10: Ec Declaration Of Conformity
, uncertainty (K) 1.5 m/s h, D EC declaration of conformity MACHINERY DIRECTIVE KFBCD001 Drill Black & Decker declares that these products described under “technical data” are in compliance with: EN62841-1:2015 , EN62841-2-1:2018. These products also comply with Directive 2006/42/EC, 2014/30/EU and 2011/65/EU. - Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom &...