Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stanley FATMAX SFMCE500B
Summary of Contents for Stanley FATMAX SFMCE500B
- Page 1 www.stanleytools.com.au SFMCE500 www.stanleytools.co.nz...
- Page 2 English (original instructions)
-
Page 5: Intended Use
Intended use Your STANLEY FATMAX SFMCE500 oscillating tool has been designed for DIY applications such as sanding operations. It is also suitable for cutting wooden materials, plastic, gypsum, non-ferrous metals and fastening elements (e.g., unhardened nails, staples), working soft wall tiles and scraping of small surfaces. - Page 6 ENGLISH (Original instructions) e. When operating a power tool outdoors, use an c. Disconnect the plug from the power source and/or the extension cord suitable for outdoor use. Use of a cord battery pack from the power tool before making any adjustments, changing accessories, or storing power suitable for outdoor use reduces the risk of electric shock.
-
Page 7: Residual Risks
(Original instructions) ENGLISH f. Do not expose a battery pack or tool to fire or Be aware of hidden hazards, before cutting into excessive temperature. Exposure to fire or temperature walls, floors or ceilings, check for the location of above 130 °C may cause explosion. NOTE The wiring and pipes. - Page 8 Chargers temperature warms up or cools down. Use your STANLEY FATMAX charger only to charge Note: To ensure maximum performance and life of lithium-ion the battery in the tool with which it was supplied. Other battery packs, charge the battery pack fully before firs use.
- Page 9 This tool includes some or all of the following accessories. The performance of your tool depends on the accessory used. STANLEY FATMAX accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool.
- Page 10 Separating, plunge and flush cutting the mains supply/Remove battery from tool. of wood, plastics, thin-walled non-ferrous pipes and extrusions. Fitting a STANLEY FATMAX accessory (fig. G - I) Segmented saw blade. Hold the tool and squeeze the accessory clamping (Part number - STA26120-XJ) lever (3).
-
Page 11: Low Battery Indicator
To switch the tool on, slide the on/off switch (1) forward (position I). Your STANLEY FATMAX corded/cordless appliance/tool has been designed to operate over a long period of time with a To switch the tool off, slide the on/off switch (1) to the rear minimum of maintenance. -
Page 12: Technical Data
2014/30/EU and 2011/65/EU. For more information, please Products and batteries contain materials that can be contact STANLEY Europe at the following address or refer to recovered or recycled reducing the demand for raw materials. the back of the manual.
Need help?
Do you have a question about the FATMAX SFMCE500B and is the answer not in the manual?
Questions and answers