Additional Safety Instructions; After Use; Residual Risks - Stanley FATMAX SFMCE520 Manual

ENGLISH
damaged or defective.
Never attempt to remove or replace
u
any parts other than those specified in
this manual.

Additional safety instructions

The inflator should not be used as a
u
vacuum cleaner (suck up dirt, debris,
or materials). It can be used as a
deflator (removing air from inflatable
products).
Inflate bike tyres, balls, rafts,
u
swimming pool floats, air mattresses,
and more in and around the home.
Recommended maximum continuous
duty at 65 psi is 2 minutes on with 5
minutes off.
The compressed air from your inflator
u
is not safe for breathing. Never
inhale air from your inflator or from
a breathing device connected to the
inflator.
Too much air pressure causes a
u
hazardous risk of bursting.
Check the manufacturer's maximum
pressure rating for objects being
inflated.
Do not leave inflator running
u
unattended. It could burst tyres or
other items.
Use a tire gauge to check the tyres
u
pressure before each use and while
inflating tyres; see the tyre sidewall for
the correct tyre pressure.
Do not modify or attempt to repair.
u
Never drill into, weld, or make any
4
(Original instructions)
modifications to the inflator or its
attachments.
Operate only with the accessories in-
u
cluded or air handling parts acceptable
for not less than 160 psi.
The use of any accessory not recom-
u
mended for use with this tool could
be hazardous.
Never "horseplay." High pressure air
u
is dangerous. Don't direct air-flow at
yourself or others.
Warning! Always leave the valve adaptor
lever open when not in use.
Inflator can become hot during use.
u
Allow inflator to cool 30 minutes before
storing away.

After use

Unplug the charger before cleaning.
u
When not in use, the appliance should
u
be stored in a dry place.
Children should not have access to
u
stored appliances.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the relevant
safety regulations and the implementa-
tion of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any
u
rotating/moving parts.
Injuries caused when changing any
u