Connecting To The Gas Supply System - Kernau KFC 90093.1 GE CI X Operation Manual

CONNECTING TO THE GAS SUPPLY SYSTEM

• Before connecting the cooker, make sure that the type of gas in the building is
responding to a gas type described on a rating table, to which the cooker was
fabrically set. If there is a need to replace the nozzles and adapt the cooker to
different type of gas, please contact with the qualified technician or installer who
have a appropriate permissions.
• The gas cooker should be installed accordingly with the current regulations and
use only in proper ventilated rooms. Before starting the installation process please
familiarize yourself with this manual. In order to assure safe usage, the installation
and servicing the cooker should be conducted by qualified service or instalator
who have appropriate permissions.
• The gas cooker should be not mounted in the room without the window or
ventilation system. In case of lack of ventilation please ensure that the room's
door are always open. The air supply necessary for proper gas combustion must
not be less than 2m3/h for every 1kW of heating power of gas burners.
• The cooker can be connected to gas supply system from left or right side.
EN
31