Chapter 3: Installation; Nozzles Replecement; Flame Adjusting After The Nozzle Replecement - Kernau KFC 90093.1 GE CI X Operation Manual

NOZZLES REPLECEMENT

Converting the gas cooker should be conducted in the following way:
1. To change the nozzle use appropriate socket wrench – Pic. 7.
2. The nozzle is located w bottom part of the burner – Pic. 8. Via the socket wrench
screw out fabrically-setted nozzle – Pic. 9- and replace it on to appropriate one for
type of gas which will be used.
Pic. 7
Rys. 7

FLAME ADJUSTING AFTER THE NOZZLE REPLECEMENT

After the nozzles replacement, in order to conduct the adjusting of ECO flame, please
take off the knob and via small screwdriver rotate the regulation screw – Pic. 5 and 6
accordingly with regulations which are indicated in below table:
Type of burner
Large
Medium
Auxiliary
Wok
Main of oven
Grill of oven

CHAPTER 3: INSTALLATION

Pic. 8
Rys. 8
Pic. 5
Rys. 5
Converting from LPG to
natural gas
3 turns counterclockwise
2,5 turns counterclockwise
2 turns counterclockwise
4 turns counterclockwise
4,5 turns counterclockwise
4 turns counterclockwise
Pic. 9
Rys. 9
Pic. 6
Rys. 6
Converting from natural
gas to LPG
3 turns clockwise
2,5 turns clockwise
2 turns clockwise
4 turns clockwise
4,5 turns clockwise
4 turns clockwise
EN
36