Chapter 7: Usage; Usage Of The Plate And Oven Burners - Kernau KFC 90093.1 GE CI X Operation Manual

USAGE OF THE PLATE AND OVEN BURNERS

Indicators of burners positions:
Closed
Full flame
ECO flame
• Ignition the oven heaters in gas version: Press the knob until perceptible resistance,
rotate counterclockwise (on left) to a FULL FLAME position. Wait 5-10 sec and
fire up the gas using the flame from the match, lighter or the spark ignitor of
cooker (it is an option in some models).
• After 10-15 sec unpress the knob. If the flame is put out please follow the ignition
istructions once again.
• Gas knobs in some models are equipped with gas outflow protection in case of
flame is putted out.
• If the cooker is equipped with this outflow protection, please press the knob
until perceptible resistance, rotate counterclockwise (to left) to a FULL FLAME
position, and after several seconds unpress the knob - in other case the flame will
put out.
• In the models which are equipped with the spark ignitor, press the ignitor after the
rotating the knob on FULL FLAME position.
• In cookers equipped with gas outflow protection, after the flame is putted out
the gas will be automatically shut off. To ignit the flame please press the knob
until perceptible resistance, rotate counterclockwise (to left) to a FULL FLAME
position, and after several seconds unpress the knob – after the activating the
outflow protection -in other case the flame will put out.
• It is not recommended to pres the knob longer than 15 sec. If after this period
the flame will not catch fire, please wait a few moments and repeat the ignition
precess. In case of ignition of oven burners, please open the oven door and wait
around 1 minute.

CHAPTER 7: USAGE

EN
45