Ashford Traveller Single Drive Assembly Instructions Manual page 14

DOUBLE DRIVE
Step 26 - 37 For Double Drive only. For Single Drive go to Step 13.
Thread 12 hooks into
the flyer.
12
x
Secure the 2 hinges to
the maiden bar.
Note the position of the
slot in the hinge.
2
x
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until
the end just protrudes.
4
x
14