2. Face the display panel up and put on a Styrofoam or
2 Face the display panel up and put on a Styrofoam or
something . (Refer to 3.15)
1. Unfasten the 6 Screw-B screws,
and remove the FRONT BEZEL and Control Panel Cover.
(The tightening torque for Screw-A is 100 N•cm.)
(The tightening torque for Screw-B is 60 N•cm.)
[Caution]
The PANEL UNIT is designed to be secured by the FRONT BEZEL and can shift and come away from the frame if the FRONT BEZEL is removed. Never let the PANEL UNIT face
horizontally or downward when the FRONT BEZEL and Control Panel Cover are removed as it is difficult to return the PANEL UNIT once it has come away.