Before Disassembly; Required Tools And Supplies; Precautions Against Electric Shock And Hot Components - Canon DP-V3120 Service Manual

1. Before Disassembly

1.1 Required Tools and Supplies

1 1 Required Tools and Supplies
Phillips screwdriver with torque control (bit #1), Length; 100mm
Phillips screwdriver with torque control (bit #2), Length; 100mm
Hex key (1 5 mm; Hexagon width across flats) Hex key (1.5 mm; Hexagon width across flats)
Hex key (4 mm; Hexagon width across flats)
Hex key (6 mm; Hexagon width across flats)
Needle-nose plier
Tweezers
Pole made of styrofoam etc, Length; 8cm
TAPE, ROLL(NO.156A)10MM X 30M
BOND, DIABOND NO.1663G BLACK BOND, DIABOND NO.1663G BLACK
GPI CHECKER
CABLE, DC POWER SUPPLY
1.2 Precautions against Electric Shock and Hot Components 1 2 P ti i t El
•Electric shock caution mark
This mark appears on parts of the circuit board to indicate possible electric shock hazards. Before working on such parts, be sure to remove the
power cord, and do not touch them.
•Hot caution mark
This mark appears on parts of the circuit board to indicate that they become hot. When the display is turned on, or even after a short time after This mark appears on parts of the circuit board to indicate that they become hot When the display is turned on or even after a short time after
the power is turned off, touching such parts may cause burns. Before working on such parts, be sure to remove the power cord, and do not touch
them.
Name
t i Sh k d H t C
Purpose
Disassembly and assembly
Disassembly and assembly
Disassembly and assembly Disassembly and assembly
Disassembly and assembly
Disassembly and assembly
Disassembly and assembly
Disassembly and assembly
To protect the monitor from damage
For [COVER, FRONT BEZEL]
For [KNOB, JOG] Assembly For [KNOB, JOG] Assembly
For GPI/TALLY lamp check
For Connecting DC POWER SUPPLY
t
Page 3
Notes
For M2 screws
For M3 screws
For [COVER, BEZEL CORNER] Detachment For [COVER BEZEL CORNER] Detachment
For [FAN, SYSTEM] Detachment
For [HANDLE] Detachment
For 5V, 12V and 24V Power Supply
Detachment
Part Number:CY9-5710-000
Part Number:CY9 8129 000 Part Number:CY9-8129-000
Part Number:CY9-5712-000
Part Number:CY9-5713-000