5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0
1. Click the Start button, then go to Setting and click on Control
Panel.
2. Click on the Network icon to start the Network Window.
3. Click on the Adapters tab, and then click "Add".
4. In the Select Network Adapter window, click "Have Disk". This will
bring up the Insert Disk window.
5. Supply the directory where the Windows NT driver files are
located.
(If in driver a: , type a:\)
6. The Select OEM Option window will show up.
Select Intel EtherExpress PRO Adapter
7. Click OK to finish the installation.
8. Once the installation is completed, the system must be shut down
and restarted for the new driver to take effect.
9. After restart, checking on the Network driver, the Properties of the
driver should look similar to the following figure.
57