1. Manuals
  2. Brands
  3. BOSER Technology Manuals
  4. Computer Hardware
  5. Celeron 370
  6. Instructions manual

BOSER Technology Celeron 370 Instructions Manual

Socket
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HS-6039
Socket 370 Celeron
• CRT/Panel•Dual Display•Dual LAN•133MHz FSB•SCSI•PC/104•
• WDT•DOC•USB•IrDA•Hardware Monitor•
• PICMG Industrial Single Board Computer•
HS-6039LV
Socket 370 Celeron
•CRT/Panel•Dual Display•LAN•133MHz FSB•SCSI•PC/104•
• WDT•DOC•USB•IrDA•Hardware Monitor•
PICMG Industrial Single Board Computer•
™
/FC-PGA
™
/FC-PGA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Celeron 370 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BOSER Technology Celeron 370

Summary of Contents for BOSER Technology Celeron 370

  • Page 1 HS-6039 ™ Socket 370 Celeron /FC-PGA • CRT/Panel•Dual Display•Dual LAN•133MHz FSB•SCSI•PC/104• • WDT•DOC•USB•IrDA•Hardware Monitor• • PICMG Industrial Single Board Computer• HS-6039LV ™ Socket 370 Celeron /FC-PGA •CRT/Panel•Dual Display•LAN•133MHz FSB•SCSI•PC/104• • WDT•DOC•USB•IrDA•Hardware Monitor• PICMG Industrial Single Board Computer•...
  • Page 2 Trademarks BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation.

  • Page 3: Table Of Contents

    Contents HS-6039 ......................1 HS-6039LV....................GENERAL INFORMATION ................3 1.1 M ..................4 AJOR EATURES 1.2 S ..................5 PECIFICATIONS 1.3 D ...................6 ELIVERY ACKAGE HARDWARE INSTALLATION ................8 2.1 C .............8 AUTION OF TATIC LECTRICITY 2.2 C ......9 AUTION ON NPACKING AND EFORE NSTALLATION 2.3 HS-6039’...
  • Page 4 3.13 U ⅡSCSI I ..........34 LTRA NTERFACE ONNECTOR 3.14 P /104 B ..............35 ONNECTION AWARD BIOS SETUP..................37 4.1 M ....................38 4.2 S CMOS S ...............39 TANDARD ETUP 4.3 BIOS F ................40 EATURES ETUP 4.4 C ..............41 HIPSET EATURES ETUP 4.5 I ..............42 NTEGRATED ERIPHERALS...

  • Page 5: General Information

    Chapter-1 General Information The HS-6039 is a 100MHz system clock provides up to 133MHz PICMG Bus ® Socket 370 for Intel Celeron™/Coppermine Industrial Single Board CPU Card with features combine together to make it an ideal all-in-one industrial single board computer, enhanced I/O effects with LAN and CRT/Panel interface and Ultra II SCSI interface.

  • Page 6: Major Features

    1.1 Major Features ® Socket 370 for Intel Celeron /Coppermine 266~933MHz CPU Four DIMM sockets provides up to 1GB (Only for PCB v1.3) Fast PCI DMA33 controller supports four IDE disk drives 100MHz system clock provides up to 133MHz Two RS-232 serial ports include 16C550 UART with 16byte FIFO One enhanced bi-directional parallel port supports SPP/ECP/EPP On board PS/2 Keyboard and PS/2 Mouse connector On board Winbond W83977 super I/O chipset...

  • Page 7: Specifications

    1.2 Specifications ® CPU：Socket 370 for Intel Celeron /Coppermine 266~933MHz CPU Bus Interface：PICMG Bus Bus Clock Rate：100MHz system clock provides up to 133MHz Memory：Four DIMM sockets provides up to 1GB (Only for PCB v1.3) ® Chipset：Intel 82443BX I/O Chipset：Winbond W83977 ®...

  • Page 8: Delivery Package

    Mouse：PS/2 6pin Mini Din or 4pin header DiskOnChip：Socket for DiskOnChip and memory size up to 144MB BIOS：Award Y2K PnP Flash BIOS Watch-Dog Timer：Set 1, 2, 10, 20, 110, 220 seconds activity trigger with Reset or NMI CMOS：DS12C887 or equivalent device DMA Channels：7 Interrupt Levels：15 Maximum Power Consumption：+5V@8A(933MHz)、...
  • Page 9 The delivery package of HS-6039 includes all following items: One HS-6039 Industrial Single Board One Printer Ports Bracket Flat Cable One com port Bracket Flat Cable Two IDE port Flat Cable One FDD port Flat Cable Utility CD User’s Manual Please contact with your dealer if any of these items are missing or damaged when purchasing.

  • Page 10: Hardware Installation

    Chapter-2 Hardware Installation This chapter provides the information on how to install the hardware of HS-6039. At first, please follow up sections 1.3, 2.1 and 2.2 in check the delivery package and carefully unpacking. Following after, the jumpers setting of switch, Watch-Dog Timer and the DiskOnChip...

  • Page 11: Caution On Unpacking And Before Installation

    2.2 Caution on Unpacking and Before Installation First of all, please follow with all necessary steps of section 2.1 in protection the HS-6039 from electricity discharge. With refer to section 1.3, please check the delivery package again with following steps: 1.

  • Page 12: Hs-6039'S Layout

    2.3 HS-6039’s Layout...

  • Page 13: Quick Listing Of Jumpers

    2.4 Quick Listing of Jumpers ............... P.25 ESET PIN ..........P.14 LOCK ELECT ..........P.14 LOCK ELECT VGA E ........P.18 NABLE ISABLE ELECT SCSI E ........P.17 NABLE ISABLE ELECT LCD V ........... P.18 OLTAGE ELECT CTA E ........P.22 NABLE ISABLE ELECT...

  • Page 14: Quick Listing Of Connectors

    2.5 Quick Listing of Connectors ATX P ............P.23 OWER WITCH ................ P.25 PEAKER HDD LED ............... P.25 FAN ................P.23 ................. P.25 EYLOCK ........... P.30 EYBOARD ONNECTOR IR C ..............P.31 ONNECTOR IDE C ..........P.26 RIMARY ONNECTOR IDE C ..........

  • Page 15: Jumper Setting Description

    2.6 Jumper Setting Description A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two pins. A jumper pin-set is OFF as a open circuit with a plastic cap inserted over one or no pin(s) between pins. The below figure 2.2 shows the examples of different jumper pin-set setting as ON or OFF in this manual.

  • Page 16: Setting The Cpu Host Clock Frequency

    2.7 Setting the CPU Host Clock Frequency The HS-6039 provides all necessary by jumper setting in using Bus-Clock frequency as the system bus clocking with JP3 setting as following: Setting the CPU Host Clock of JP3 : Host Clock 66MHz 100MHz *133MHz Setting the CPU Host Clock of JP4 :...

  • Page 17: Watch-Dog Timer

    2.10 Watch-Dog Timer There are three access cycles of Watch-Dog Timer as Enable, Refresh and Disable. The Enable cycle should proceed by READ PORT 443H. The Disable cycle should proceed by READ PORT 045H. A continue Enable cycle after a first Enable cycle means Refresh.
  • Page 18 JP11 (5-10) : Watch-Dog Timer - Out Period PERIOD 9-10 *1 sec 2 sec 10 sec 20 sec 110 sec 220 sec The Watch-Dog Timer is control by two I/O ports. 443H I/O Read The Enable cycle. 443H I/O Read The Refresh cycle.

  • Page 19: Scsi Controller

    2.11 SCSI Controller The HS-6039 provides SYMBIOS 53C895 Ultra II SCSI Controller transferred rate up to 80 Mbytes/Sec, and can drive up to 15 set SCSI HDD. A JP6 is using for select the enable or disable function of SCSI control.

  • Page 20: Vga Controller

    2.12 VGA Controller The HS-6039 provides three possible connectives of VGA connections. One standard DB15 internal VGA connector as following CN26 pin information. Another header is 5X2 internal VGA connector. Others internal 50-pin header for LCD Panel connection as following CN14 pin information. CN14 : 50pin Internal LCD Panel Connector PIN NO.
  • Page 21 Flat Panel Display Interface Mono Color HS-6039 STN- STN- STN- STN- STN-D STN-D 9/12/16 18/24 36-bit 18/24 8-bit 16-bit 8-bit 16-bit 8-bit 8-bit 16-bit 24-bit Name (4bP) (4bP) (4bP) (4bP) SHFCLK: Pixel clock .Shift Clock FLM.VSYNC: First line marker M, DE: Panel AC driver control LP, HSYNC: Latch pulse ENABKL: Power sequencing control for enabling the back-light.(high active)
  • Page 22 ® The HS-6039 has built-in a Intel 69030 VGA Controller with on chip 4MB memory, support resolutions up to 1024x768x16M colors, reserved internal 50pin Panel connector. ® To get more VGA drivers information, please refer to the Intel Internet address: www.intel.com JP5 : VGA Enable/Disable Select Description *1-2...
  • Page 23 CN21 : 10pin Header 5X2 VGA connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION GROUND GREEN GROUND BLUE GROUND HSYNC GROUND VSYNC GROUND CN26 : 15pin DB-15 Female VGA connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION GREEN BLUE GROUND GROUND GROUND GROUND GROUND HSYNC...

  • Page 24: Diskonchip Address Setting

    2.13 DiskOnChip Address Setting The HS-6039 provides a U16 socket for install the DiskOnChip module. A JP11 may select the starting memory address of the DiskOnChip (D.O.C.) for avoid the mapping area with any other memory devices. If you have another extra memory devices in the system with the same memory, neither the HS-6039 nor the extra memory devices will function normally.

  • Page 25: Connection

    Chapter-3 Connection This chapter gives all necessary information of the peripheral connections, switches and indicators. 3.1 Power and FAN Connectors The HS-6039 provides one 3pin FAN out connector as following CN3 pin information. S1 is ATX Power Switch, CN11 is ATX Power Connector, CN12 is 5pin ATX Power Connector.
  • Page 26 The HS-6039 support ATX Power function by CN11. The connector of CN12 can control the 5pin ATX Power via the extension cable from the Backplane. CN11 DESCRIPTION CN11 DESCRIPTION -12V PS_ON 5VSB +12V...

  • Page 27: Ide' Sled, Keylock And Reset Button

    3.2 IDE's LED, Keylock and Reset Button The HS-6039 has one LED indicates out power-on status. And the following provides the pin information for IDE's LED indicator, Keylock and Reset Button connections from CN2, CN4 and JP1. CN2 : IDE LED Connector PIN NO.

  • Page 28: Pci E-Ide Drive Connector

    3.4 PCI E-IDE Drive Connector Two standard 40pin header daisy chain drive connector provides as CN8 and CN9 with following pin assignment. Total four IDE disk (Integrated Device Electronics) drivers may connect. CN8: Primary IDE Interface Connector PIN NO. DESCRIPTION PIN NO.
  • Page 29 CN9: Secondary IDE Interface Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET GROUND DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4 DATA 11 DATA 3 DATA 12 DATA 2 DATA 13 DATA 1 DATA 14 DATA 0 DATA 15 GROUND...

  • Page 30: Parallel Port Connector

    3.5 Parallel Port Connector A standard 26pin flat cable driver connector provides as CN18 with following pin assignment for connection to parallel printer. CN18: Parallel Port Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION STROBE DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5...

  • Page 31: The Floppy Disk Drive Connector

    3.6 The Floppy Disk Drive Connector A standard 34pin header daisy-chain drive connector provides as CN13 with following pin assignment. Total two FDD drivers may connect. CN13 : FDD Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION GROUND REDUCE WRITE GROUND GROUND GROUND INDEX#...

  • Page 32: Serial Ports Connectors

    3.7 Serial Ports Connectors The HS-6039 offers two high speeds 16C550 compatible UART with Read/Receive 16byte FIFO serial ports with two internal 10pin header. CN22/19 : Serial Port 10pin Header (COM1/COM2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 3.8 Keyboard Connectors The HS-6039 offers two possibilities for keyboard connections to external PS/2 type keyboard at CN27 or an internal 5pin header at CN5.

  • Page 33: Ps/2 Mouse 6Pin Mini Din Connector

    3.9 PS/2 Mouse 6pin Mini Din Connector The HS-6039 provides an external PS/2 mouse connector at CN25. CN25 : PS/2 6pin Mini Din Mouse Connector PIN NO. DESCRIPTION DATA N.C. N.C. 3.10 IR Connector The HS-6039 provides a 5pin internal IR communication connector as following CN6 pin information.

  • Page 34: Usb Ports Connector

    3.11 USB Ports Connector The HS-6039 provides two internal 8pin USB ports connectors. Please refer to the following detail pin information. CN17：USB Connector PIN NO. CN17 PIN NO. CN17 BD0- BD1- BD0+ BD1+ GROUND GROUND 3.12 LAN Interface Connector The HS-6039 provides two external (RJ-45) and two internal (Header 5x2) 100 Based LAN interface connector.
  • Page 35 CN20, CN23：LAN1 & LAN2 Connector (Header 5x2 ) PIN NO. CN20, CN23 R/C GND R/C GND JP13 : LAN1 Enable/Disable Select PIN NO. DESCRIPTION *1-2 Enable Disable JP14 : LAN2 Enable/Disable Select PIN NO. DESCRIPTION *1-2 Enable Disable...

  • Page 36: Ultraⅱscsi Interface Connector

    3.13 UltraⅡSCSI Interface Connector This HS-6039 provides one internal UltraⅡ SCSI connector for all kinds of user application and easy connection, one 68pin female D-Sub connector for 16bit UltraⅡ SCSI port. Please reference to the following for detail pin assignment. CN10 pin assignment CN10 pin assignment +SD12...

  • Page 37: Pc/104 Bus Connection

    3.14 PC/104 Bus Connection The HS-6039’s PC/104 expansion bus provides you to connect all kind of PC/104 modules. The PC/104 bus has been already become the industrial embedded 16bit PC standard bus. You can easily install over thousands type of PC/104 modules from hundreds of venders in the world.
  • Page 38 CN15&CN16 : PC/104 Expansion Bus (CN15 = 64pin female connector; CN16 = 40pin female connector.) CN15 CN15 CN16 CN16 Row A Row B Row D Row C 1 IOCHECK* 33 0V 1 0V 21 0V 2 SD7 34 RESETDRV 2 MEMCS16* 22 SBHE* 3 SD6 35 +5V...

  • Page 39: Award Bios Setup

    Chapter-4 AWARD BIOS Setup The HS-6039 uses the Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.

  • Page 40: Main Menu

    4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to enter the sub-menu.

  • Page 41: Standard Cmos Setup

    4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode.

  • Page 42: Bios Features Setup

    4.3 BIOS Features Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. ROM PCI/ISA BIOS (2A69KD2L) BIOS FEATURES SETUP AWARD SOFTWARE, INC.

  • Page 43: Chipset Features Setup

    4.4 Chipset Features Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses.

  • Page 44: Integrated Peripherals

    4.5 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks.
  • Page 45 Panel# Panel Type 1024*768 Dual Scan STN Color Panel 128*1024 TFT Color Panel 640*480 Dual Scan STN Color Panel 800*600 Dual Scan STN Color Panel 640*480 Sharp TFT Color Panel 640*480 18-bit TFT Color Panel 1024*768 TFT Color Panel 800*600 TFT Color Panel 800*600 TFT Color Panel 800*600 TFT Color Panel 800*600 Dual Scan STN Color Panel...

  • Page 46: Power Management Setup

    4.6 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. ROM PCI/ISA BIOS (2A69KD2L) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC.

  • Page 47: Pnp/Pci Configuration Setup

    4.7 PnP/PCI Configuration Setup In this section, the PnP/PCI configuration setup allows you to configure the ISA and PCI devices installed in your system by manually or auto. ROM PCI/ISA BIOS (2A69KD2L) PNP/PCI CONFIGURATION AWARD SOFTWARE, INC. PnP OS Installed Assign IRQ For VGA : Enabled Resources Controlled by...

  • Page 48: Software Utilities

    Chapter-5 Software Utilities This chapter provides the detailed information of VGA、LAN and SCSI function. How to install the configuration is also included. Section include: VGA DRIVER INSTALLATION NETWORK DRIVER INSTALLATION SCSI DRIVER INSTALLATION...

  • Page 49: Vga Driver Install For Win95&98

    5.1 VGA DRIVER INSTALL FOR WIN95&98 1. Click Start, then Setting, then Control Panel, start the Display applet program. 2. Select the setting page, push the advanced properties button. Push the change button in the adapter area. 3. Continue to click “Next”. Select Display a list of all drivers in a specific location, so you can select the drivers you want.

  • Page 53: Vga Driver Install For Win Nt4.0

    5.2 VGA DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Setting and click on Control Panel. 2. Click on Display icon to start the Display Properties Window. 3. Click on the Settings tab, and then click on Display Type. 4.

  • Page 56: Network Driver Install For Win 95&98

    5.3 NETWORK DRIVER INSTALL FOR WIN98&95 Win98 Windows 98 will detect the network driver automatically. Win95 1. Click Start, then Setting, in the “Setting” select Control panel. 2. Start the network applet program. 3. In the Network window, click “Add”. 4.

  • Page 59: Network Driver Install For Win Nt4.0

    5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0 1. Click the Start button, then go to Setting and click on Control Panel. 2. Click on the Network icon to start the Network Window. 3. Click on the Adapters tab, and then click “Add”. 4.

  • Page 61: Ultra Ii Scsi Install For Win 95&98

    5.5 ULTRAⅡSCSI INSTALL FOR WIN95 & 98 WINDOWS 98 WINDOWS 98 will detect the SYMBIOS LOGIC 895 UltraⅡ SCSI driver WINDOWS 95 1. Click Start, then Setting, in the “Setting” select Control panel. 2. Start the System applet program. Select Device Manager page. 3.

  • Page 64: Ultra Ii Scsi Install For Win Nt4.0

    5.6 ULTRAⅡSCSI INSTALL FOR WINDOWS NT 4.0 1. Change Boot sequence in CMOS Setup Utility select CDROM. 2. Boot from CDROM (WINDOWS NT 4.0) 3. When WINDOWS NT SETUP start, press “F6”. 4. To specify additional SYMBIOS SCSI adapter, press “S”. 5.

This manual is also suitable for:

Celeron hs-6039Celeron hs-6039lvCeleron fc-pga

Table of Contents