Table of Contents
Advertisement
Chapter-1
General Information
The HS-6039 is a 100MHz system clock provides up to 133MHz PICMG Bus
®
Socket 370 for Intel
Card with features combine together to make it an ideal all-in-one industrial
single board computer, enhanced I/O effects with LAN and CRT/Panel
interface and Ultra II SCSI interface.
With on board DMA33 of Mode 3/4 to IDE disk drive interface architecture,
the HS-6039 supports with maximum 33MB/sec in data transfer rating to two
IDE disk drive connections.
®
On board 4MB Intel
x 1024 64K colors resolution. And it also provides one internal 50pin
connector for carious type of the Panel connection.
The advanced PICMG Bus add on connection of HS-6039 allows user could
easily obtain both ISA's 16bit and PCI's 32bit full set signals from a full-size
PICMG slot for suitable plug into a any size system with 8/16/32bit ISA and
PCI slots operating. The HS-6039 provides with four DIMM sockets provides
up to 1GB of main system memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission. You can also use the DOS version
™
of the DiskOnChip
without the necessity of other software supports up to 144MB.
The HS-6039 features include Dual Intel
board. With two RJ-45 and two 10pin header connector provides an easily for
user's LAN application.
If a non-expect program cause halts, the on board Watch-Dog Timer will
automatically Reset the COU or generate an interrupt. The Watch-Dog is
designed with hardware only and doesn't need any arithmetical functions of
a real-time clock chip. This ensures the reliability in an unmanned or
standalone system.
TM
Celeron™/Coppermine
69030 CRT/Panel display controller provides up to 1280
socket by issuing commands from the DOS prompt
®
82559 100 Based LAN design on
Industrial Single Board CPU
3
Advertisement
Table of Contents
