Table of Contents
Advertisement
2.13 DiskOnChip Address Setting
The HS-6039 provides a U16 socket for install the DiskOnChip
module.
A JP11 may select the starting memory address of the
DiskOnChip (D.O.C.) for avoid the mapping area with any other
memory devices. If you have another extra memory devices in the
system with the same memory, neither the HS-6039 nor the extra
memory devices
will function normally. Please setting both at different memory
address mapping.
JP11(1-4) : DiskOnChip Address Select
Memory Address Mapping
D000
D800
*) : default setting
The D.O.C. function allows the system in using without FDD nor
HDD. The D.O.C. may formatting as driver C: or driver A: User may
also easily uses the DOS's commands such as FORMAT, SYS,
COPY, XCOPY, DISCOPY and DISKCOMP etc. This is means that
the D.O.C. may uses as driver-A if the system without FDD-A for
ambient application. Please contact with your supplier for different
size D.O.C. module.
2.14 CPU Temperature Alarm
The HS-6039 provides CPU Temperature Alarm Function. A JP8 is
using for select the enable or disable function of CTA.
JP8 : CPU Temperature Alarm Enable/Disable Select
1-2
2-3
22
OFF
E000
E800
OFF
Enable
Disable
1-2
3-4
ON
ON
ON
ON
OFF
OFF
Advertisement
Table of Contents
