Table of Contents
Advertisement
5.1 VGA DRIVER INSTALL FOR WIN95&98
1. Click Start, then Setting, then Control Panel, start the Display
applet program.
2. Select the setting page, push the advanced properties button.
Push the change button in the adapter area.
3. Continue to click "Next". Select Display a list of all drivers in a
specific location, so you can select the drivers you want.
4. Click "Next". Select the Specify a location checkbox and click
"Browse".
5. Specify the path to the new driver and press the <ENTER> key.
(if in driver A:, select a:\win98)
6. The Select device dialog box will appear.
Select Chips and Tech. 69030 PCI
7. Continue choosing close until asked to restart machine.
8. After the system has restarted, you can go back into the display
applet and select alternate screen resolutions and color depths.
Note: Installation procedure for Windows 95 is similar to
Windows98.
47
Advertisement
Table of Contents
