Vga Driver Install For Win Nt4.0 - BOSER Technology Celeron 370 Instructions Manual

5.2 VGA DRIVER INSTALL FOR WIN NT4.0

1. Click the Start button, then go to Setting and click on Control
Panel.
2. Click on Display icon to start the Display Properties Window.
3. Click on the Settings tab, and then click on Display Type.
4. In the Change Display Type window, click on "Have Disk".
5. Specify the path to the new driver and press the <ENTER>key.
(if in driver A:, type a:\nt40)
Chips Video Accelerator (655545/54/55/68554
Select
69000/69030)
6. Click OK or press Enter
7. You will see warning panel about Third Party Drivers. Click on
Yes to finish the installation.
8. Once the installation is completed, the system must shut down
and restart for the new driver to take effect.
9. After restart, checking on the VGA driver, the properties of the
driver should look similar to the following figure.
51