Removing The Side Cover And Front Panel Assembly; Installing A Cpu - Asus PCI/E-P54NP4 Installation Manual

Removing the side cover and
front panel assembly
1. Remove the cover screws on the rear panel.
2. Pull the side cover toward the rear panel until its hooks disengage from the
chassis tab holes. Set the side cover aside.
3. Locate the front panel assembly hooks, then lift them until they disengage
from the chassis.
4. Swing the front panel assembly to the right, until the hinge-like tabs on the
right side of the assembly are exposed.
5. Remove the front panel assembly, then set aside.
Air duct duct

Installing a CPU

To install a CPU:
1. Locate the CPU socket on the motherboard.
2. Press the load lever with your thumb
(A), then move it to the left (B) until it
is released from the retention tab.
To prevent damage to the socket
pins, do not remove the PnP cap
unless you are installing a CPU.

1
1
2
Chassis tab holes
Installation manual
4
3
3
2
3
Retention tab
A
B
Load lever
4
4
3