Table of Contents
Advertisement
Installing a DIMM
1.
Locate the DIMM sockets in the motherboard.
2.
Unlock a DIMM socket by pressing the retaining clips outward.
3.
Align a DIMM on the socket such that the notch on the DIMM matches the
break on the socket.
4.
Push the DIMM to the socket until the retaining clips snap inward.
•
•
Installing an expansion card
1.
Remove the metal cover opposite
the slot that you intend to use.
3.
Insert the card connector to the
slot, then press the card firmly
until it fits in place.
4.
Replace the metal bracket lock.
Unplug the power supply before adding or removing DIMMs. Failure to do
so may cause damage to the motherboard and/or components.
A DDR DIMM is keyed with a notch so that it fits in only one direction. Do not
force a DIMM into a socket to avoid damaging the DIMM.
1
Installation manual
2.
Remove the metal bracket lock.
2
4
3
Advertisement
Table of Contents
