ASUSTeK COMPUTER, INC. (“ASUS”). Products and corporate names mentioned in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used for identification purposes only.
Contents ... 3 Notices ... 5 Notes for this manual ...11 Safety information ...12 Setting up your system ...12 Care during use...12 Welcome ... 13 Package contents ...13 Getting to know your EeeTop PC ... 14 Front view ...14 Rear view ...17 Side views ...19 Using the touch screen (on selected models) ...20 Showing the touch pointer ...20...
Configuring audio output settings ...35 Recovering your system ... 36 Using the hidden partition ...36 Using the Support DVD ...37...
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility”...
France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) • 100mW for frequencies between 2446.5 MHz and 2483.5 MHz Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm. NO DISASSEMBLY No Exposure to Liquids waterproof or oil-proof.
And, the environment is protected from any uncontrolled release of harmful chemicals. ASUS works with recycling vendors with the highest standards for protecting our environment, ensuring worker safety, and complying with global environmental laws. Our commitment to recycling our old equipment grows out of our work to protect the environment in many ways.
NOTE: Additional information for special situations. All illustrations and screenshots in this manual are for reference only. Actual product specifications and software screen images may vary with territories. Visit the ASUS website at www.asus.com for the latest information. EeeTop PC ET22 Series...
Safety information Your EeeTop PC ET22 Series is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system •...
Congratulations on your purchase of EeeTop PC ET22 Series. The following illustration displays the package contents of your new product. If any of the following items is damaged or missing, contact your retailer. Package contents EeeTop PC ET22 Series AC adapter Warranty card Note: The number and content of the discs may vary with territories.
Getting to know your EeeTop PC Front view Refer to the following diagram to identify the components on this side of the system. Webcam The built-in webcam with the digital microphone allows you to start video chats online. Webcam LED Indicates that the built-in webcam is enabled.
Digital Microphone (Built-in) The built-in microphone can be used for video conferencing, voice narrations, audio recordings, and multimedia applications. Use the following methods to enable the built-in webcam and microphone. • Go to Control Panel > Scanners and Cameras > USB Video Device #2 and follow the onscreen instructions.
Up Button Press to increase the display brightness. Press to scroll up when navigating the menu. Home Button Preess to switch between system desktop and applications. Hard disk drive LED Indicates hard disk drive activity. Wireless LAN LED Indicates that the internal wireless LAN is enabled. (Windows® software settings are necessary to use the wireless LAN.) EeeTop PC ET22 Series...
Rear view Refer to the following diagram to identify the components on this side of the system. Stand Allows you to adjust the angle of the display panel. Kensington® Lock port The Kensington® lock port allows the computer to be secured using Kensington® compatible security products.
Optical S/PDIF Out port The optical S/PDIF Out port connects an external audio output device via an optical S/PDIF cable. Antenna Input (on selected models) The antenna input is for TV or FM Radio (on selected models) frequency signal and allows for use with the provided digital TV/FM antenna or input from subscription television services.
Side views Refer to the following diagrams to identify the components on both sides of the system. Memory card reader Normally an external memory card reader must be purchased separately in order to read memory cards. This EeeTop PC has a built-in memory card reader that supports MMC/SD/SD HC/MS/MS Pro cards used in devices like digital cameras, MP3 players, mobile phones, and PDAs.
Using the touch screen (on selected models) EeeTop PC brings digital life to your fingertips. With a few touches or the use of the stylus pen, you can make EeeTop PC work at your command. Your touch functions like a mouse device: •...
Click Change touch input settings. Click the Touch tab on the top and click the box before Show the touch pointer when I’m interacting with items on the screen. Click OK to finish the configuration. Cleaning the touch screen The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the screen clean from foreign objects or excessive dust accumulation.
Using the keyboard Your EeeTop PC comes with a wired or wireless keyboard that facilitates your control of the system. For selected models, on the right side of the keyboard is an extra USB port, and on the left is where the stylus pen is stored. Press the stylus pen and it will eject. •...
Function keys The following table defines the colored function keys on the keyboard. To access the colored commands, hold the Function key while pressing a key with a colored command. The actual colored function keys and supported commands may vary with models. Fn + F1: Places the system in suspend mode.
Positioning your EeeTop PC Placing on the desktop Place your EeeTop PC on a flat surface such as a table or desk, and pull the stand open until it pull the stand open until it snaps in place. Then, tilt the display panel to an angle of between 12 and 27 degrees from an upright position.
Setting up your EeeTop PC Connecting the wired keyboard and mouse Connect the keyboard to the USB port on the rear panel ( keyboard to the USB port on the left side if the keyboard cable is not long enough.Then, connect the mouse to the keyboard USB port ( Connecting the wireless keyboard and mouse Install batteries to the wireless keyboard and...
Powering on the system Connect the supplied AC adapter to the DC IN jack on the rear panel ( the Power switch on the front panel ( WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug to the system.
Calibrating the screen EeeTop PC comes with the following software tool that allows you to adjust touch screen precision. The touch-enabled screen is available on selected models. From the Windows® desktop, click Start > All Programs > Touch Panel Tool > Touch Panel Calibration.
Configuring a wireless connection Click the wireless network icon with an orange star Select the wireless access point you want to connect to from the list and click Connect to build the connection. If you cannot find the desired access point, click the Refresh icon right corner to refresh and search in the list again.
Configuring a wired connection Using a static IP Click the network icon with a yellow warning triangle in the Windows® Notification area and select Open Network and Sharing Center. Ensure that you have connected the LAN cable to the EeeTop PC. Click Change adapter settings in the left pane.
Click Internet Protocol Version 4(TCP/ IPv4) and click Properties. Select Use the following IP address. Enter your IP address, Subnet mask, and Default gateway. If needed, enter the Preferred DNS server address. After entering all the related values, click OK to finish the configuration. EeeTop PC ET22 Series...
Using a dynamic IP (PPPoE) Repeat steps 1–4 in the previous section. Select Obtain an IP address automatically and click OK. (Continue the following steps if using PPPoE) Return to the Network and Sharing Center and then click Set up a new connection or network.
Select Broadband (PPPoE) and click Next. Enter your User name and, Password, and Connection name. Click Connect. Click Close to finish the configuration. EeeTop PC ET22 Series...
Click the network icon in the notification area and click the connection you just created. Enter your user name and password. Click Connect to connect to the Internet. EeeTop PC ET22 Series...
Configuring the audio output EeeTop PC supports different types of audio configurations. Set up the system using stereo speakers. Speaker configurations Set up the system with the following speaker configurations: Name Speaker system 2-channel (stereo) Left speaker and right speaker. Audio jack Headphones/2-channel Audio Out...
Configuring audio output settings After connecting a speaker system to your EeeTop PC, follow the steps below to configure the speaker settings: Right-click the speaker icon in the Windows® notification area and click Sounds. Select a playback device and click Properties to configure the settings.
Turn on your computer. When the EeeTop logo appears, press <F9> (requires a recovery partition). The ASUS Recovery CD/DVD window appears. Select Recover system to a partition. Follow the onscreen instructions to complete the recovery process. You will lose all your data during the system recovery. Ensure that you make a backup of it before recovering the system.
Using the Support DVD The support DVD includes an image of the operating system installed on your system at the factory. The recovery DVD provides a comprehensive recovery solution that quickly restores your system to its original working state, provided that your hard disk drive is in good working order.
Set up your language, time zone, keyboard, computer name, and user name to enter the Windows® OS. ・ This support DVD is for EeeTop PC only. DO �OT use it on other computers.Visit the ASUS This support DVD is for EeeTop PC only. DO �OT use it on other computers. Visit the ASUS website at www.asus.com for any updates.
Manufacturer Address, City Country Authorized Representative in Europe ASUS COMPUTER GmbH Address, City Country EeeTop PC ET22 Series ASUSTek COMPUTER I�C. �o. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWA� R.O.C TAIWA� HARKORT STR. 21-23, 40880 RATI�GE� GERMA�Y...