Table of Contents
Advertisement
2.3
Removing the side cover and front
panel assembly
Follow the steps below to remove the side cover and front panel assembly.
1.
Remove the cover screws on the rear panel.
2.
Pull the side cover toward the rear panel until its hooks disengage from the
chassis tab holes. Set the side cover aside.
3.
Locate the front panel assembly hooks, then lift them until they disengage
from the chassis.
4.
Swing the front panel assembly to the right, until the hinge-like tabs on the
right side of the assembly are exposed.
5.
Remove the front panel assembly, then set it aside.
2-4
Chapter 2: Basic installation
Advertisement
Table of Contents
