To edit your writing:
1. Tap and hold the stylus next to the text that you wish to select until the
insertion point appears.
2. Without lifting, drag the stylus across the text to select it.
If you accidentally write on the screen, tap Tools, then Undo and try
again. You can also select text by tapping the Pen button to deselect it,
then dragging the stylus across the screen.
3. Tap Edit on the Command bar and select an action, or use one of the
tools in the Input Panel to enter a new text.
To convert writing to text:
Tap Tools, then Recognize.
To select a zoom level:
Tap Tools, then tap a zoom percentage from the options.
Learn the basics
The writing is turned into text