Receiving Infrared Beams - Asus MyPal A730 Handbook

Receiving infrared beams

To receive a file via infrared beam:
1. From the Beam settings screen, tap the link Receive an infrared
beam. Your device automatically looks for another device using
infrared. Tap Cancel if you wish to abort the command.
2. If your device did not find a sending device through the IR port, a
message appears informing you of such. Tap Close to return to the
previous screen.
2. If an infrared device within range
beams a file or data to you, a
message prompts you to receive it.
Tap Yes to receive or No to reject.
NOTE Make sure to align the IR
ports so that they are
unobstructed and within the
required range.
Get connected 8-9