Driver Installation; Using With Databases; Noah 4; Standalone Version - Interacoustics Affinity Compact Instructions For Use Manual

2.7 Driver installation

Now that the Affinity Compact Suite software is installed, you must install the driver for the hardware.
1. Connect the Affinity Compact hardware to the PC via the USB connection.
2. The system will now automatically detect the hardware and display a pop-up on the bottom right of the
task bar. This indicates that the driver is installed and the hardware is ready for use.
Please consult the User Manuals included on the USB for further instructions how to operate the Affinity
Compact.

2.8 Using with databases

2.8.1 Noah 4

If you are using HIMSA's Noah 4, the Affinity Compact software will install itself automatically in the menu
bar on the start page, along with all the other software modules.
Working with OtoAccess®
For further instructions about working with OtoAccess®, please see the OtoAccess® operation manual

2.9 Standalone version

If you do not have Noah on your computer you can directly launch the software suite as a stand-alone
module. However, you will not be able to save your recordings when using this way of working.

2.10 How to configure an alternative data recovery location

The Affinity CompactAffinity Compact Suite has a backup location for data to be written in the case that the
software is accidentally terminated or the system crashes. The following locations are the default storage
folder for recovery or standalone databasesC:\ProgramData\Interacoustics\Affinity Compact Suite\
NOTE: This feature can be used to change the recovery location when you are working through a database
as well as the standalone save location.
1. Go to C:\Program Files (x86)\Interacoustics\Affinity Compact Suite
2. In this folder find and launch the executable program titled FolderSetupAffinity Compact.exe or
FolderSetupEquinox.exe
3. The below pop up will appear
D-0123234-D – 2020/05
Affinity Compact - Instructions for Use - EN
Page 22